Creating Stained Concrete Floors Is straightforward And Cost-Effective
If you like the design of acid washed concrete, you'll love knowing how you may create stained concrete floors. This technique is much simpler, a lot less expensive and creates the identical beautiful results. In the following paragraphs, we will share some pointers on staining your concrete floor. Read on to learn more.
awesome stained concrete in austin tx
Before you do anything else, take a trip to your local home improvement center and gather your supplies. Listed below are the things you'll need:
* Two shades of solid concrete stain (e.g. darkish and tan)
* Concrete sealer within the degree of sheen that you prefer
* Single gallon sprayer with an adjustable nozzle
* A lengthy handled paint roller with semi-smooth nap
* Painters tape and plastic for cover
* A paint tray
You'll also need to get a big little bit of cardboard or know that you'll need an out-of-the-way space on the floor to test your technique before starting.
Prep the room in which you will be working. Take everything out and cover the walls about 4 feet high all over with your plastic and painters tape. This will prevent over-spray from damaging your walls. Once that's done, get the concrete good and clean by vacuuming or sweeping. Something that happens to be on the floor when you begin your treatment will continue to be stuck to the floor forever.
Start Staining Your Concrete Floor
Along with your room prepped, it is time to begin. Start by mixing the stain just like you would paint. Once it's thoroughly mixed, fill your sprayer and commence by testing your spraying pattern on your own piece of cardboard or out-of-the-way area of flooring.
Begin spraying to the side of the room away from the door and come towards the door. This is very important! You don't want to get trapped about the far side of your room by the wet floor.
When you work, keep the sprayer several feet above the floor to prevent having puddles of stain. What you would like is a nice splattered effect. Understand that you're not trying for a solid finish. You want the concrete to appear like natural stone when you are done. Once you have practiced a bit and feel confident, you can begin on your own floor.
TIP: If you are treating the edges with the floor, hold your sprayer up several feet so that you are spraying the plastic that you put over the walls. In this manner, you will get a nice splattered influence on the floor next to the wall and steer clear of making puddles.
Completing the work will take a surprisingly short time period. It is possible to apply the first coat in a average sized room in under an hour. If you have stained left, it is possible to pour it back into the can and put it aside. Be sure to clean your sprayer thoroughly because your second coat is a different color out of your first coat.
You shouldn't be in a rush to apply the next coat. Be sure to wait until the first coat is thoroughly dry because you be walking on it to apply the second coat. Just follow the same process using a careful eye to completing spaces that didn't get splattered enough initially.
When you're done, clean up and wait until the second coat is dry. If you like your final result, you are able to go ahead and seal a floor. If you want a different look or need to touch up, just add more layers until you're satisfied with the results.
Seal Your Stained Concrete Floor
Your sealer is clear, so it will not affect the appearance of your floor other than to add shine if that is what you want. You should use between three and 6 coats of sealant. Make use of the first couple of coats using your roller, and apply the final coat with your sprayer set to fine mist for a flawless finish. Make sure to wait until each coat is dry before using the next coat.
Once you're done, be sure to give your stained concrete floors the required time to dry completely before moving furniture in. Along with your floor thoroughly dried and seasoned, you will have a tough, attractive and thrifty surface to savor for a good while.